GOST Wireless Water Resistant Monitoring Sensors
All of our wireless sensors are compatible with GOST Phantom, GOST Insight HD and GOST NT-Evolution systems. Based on the system options, sensors will alert up to 8 people – via call and/or text within the cellular ranger, through our Inmarsat Satellite based tracking system, or even using an existing onboard satellite phone.
High Water Sensor (GMM-IP67-HWS)
This wireless High Water Sensor is designed to withstand the harsh marine environment. It includes a mounting bracket for the float switch to be installed in the bilge of the vessel, slightly below the vessel’s factory-installed high water sensor. Owners will be notified immediately from their GOST system in the event of high water in the bilge. Multiple high water sensors are recommended for vessels with multiple bulkheads.
Temperature Sensor (GMM-IP67-TempSensor)
This wireless Temperature Sensor’s enclosure is designed to withstand the harsh marine environment. The coil sensor can be mounted virtually anywhere on the vessel, and set to trigger an alarm when temperatures exceed or drop below a preset range.
Low Voltage Sensor (GMM-IP67-LVS)
This wireless Low Voltage Sensor is designed to withstand the harsh marine environment. This sensor will monitor any 12V or 24V battery bank, and will trigger an alarm when voltage drops (below 11.6V and 23.3V, respectively) for more than 2 minutes. There is also a dip switch on the circuit board that allows installers to switch between 12V and 24V.
Freezer Temperature Sensor (GMM-IP67-Freezer)
This wireless Freezer Temperature Sensor is designed to monitor the temperature inside the vessel’s food, ice storage, and bait freezers. If the temperature rises to 39°F (+/- 5°F), an alarm will trigger.
Shore Power Loss Sensor (GMM-IP67-PowerOut)
This wireless AC Shore Power Loss Sensor’s enclosure is designed to withstand the harsh marine environment. Simply plug into any 110VAC outlet to monitor, and when shore power is lost, an alarm will trigger. Features an approximate 8 minute delay to avoid alarm trigger during a temporary power switchover.
6. Heat Temperature Sensor (GMM-IP67-Heat)
This wireless Heat Temperature Sensor is designed with a wireless heat probe to monitor the temperature inside the vessel’s Engine Room.If the temperature reaches 160°F (+/- 5.4°F), an alarm will trigger. The alarm will reset when the temperature reaches 130°F (+/- 10°F).